Starburst Wrapper Bracelet Tutorial

starburst wrapper bracelet tutorial!

Big news! The Starburst Wrapper Bracelet Tutorial is now available as an Amazon e-book!

It’s only $2.99 and with the e-book version, you can take this handy step-by-step guide wherever you’re going to be folding! For an excellent crafty gift, give the e-book along with a pack of Starburst. The purchased book can be read on the iPad, Kindle, e-reader, or your computer screen so it’s portable and versatile.

Thanks for your support of Fluffyland Craft & Sewing Blog, and enjoy crafting!


 

 

 


Have you been wondering how to make the amazing bracelets from Starburst wrappers? A simple folding method, plus some finishing tips, will help you make your very own Starburst bracelet. It looks like a lot of steps, but after you’ve made a few links you’ll have the folding method memorized. The average bracelet takes 30-36 Starburst wrappers, so save up! Ask friends to unwrap carefully and “donate”, and to avoid candy binges and sugar highs, unwrap all your Starbursts and save them in a ziploc bag for later. You can save money by buying Starbursts in bulk from Amazon.

If you’re clever, you can make this bracelet from any rectangular wrapper: dum dum wrappers, tootsie roll wrappers, most gum wrappers, now and laters… be creative, there are lots of options!

Keep in mind that when you have finished, you need the bracelet to be big enough to slide on and off your wrist without too much trouble. Because of the folding method, the bracelet will stretch slightly, so this shouldn’t be much of a problem.., but be careful. This is the only tutorial that contains the ending method that blends in with the rest of the bracelet; it’s very tricky but entirely feasible.

Click on any of the photos for a larger view.

Step 1
starburst wrapper bracelet tutorial
Take your first wrapper… and flip it over.
I know, it’s tricky.

Step 2
starburst wrapper bracelet tutorial
Fold (hot dog) one side in to the halfway point.

Step 3
starburst wrapper bracelet tutorial
Fold (hot dog) the other side to the halfway point.

Step 4
starburst wrapper bracelet tutorial
Next, fold (hot dog) the whole thing in half so the raw edges you just folded are on the inside crease.

Step 5
starburst wrapper bracelet tutorial
Fold (hot dog) in half again.

Step 6
starburst wrapper bracelet tutorial
Fold (hamburger) in half.

Step 7
starburst wrapper bracelet tutorial
Fold (hamburger) one side to the halfway point.

Step 8
starburst wrapper bracelet tutorial
Fold (hamburger) the other side to the halfway point. Steps 1-8 give 1 completed link.

Repeat steps 1-8 with the next wrapper.

 

 

 

Step 9
starburst wrapper bracelet tutorial
Insert points 1 and 2 into slots A and B, so it looks like this:
starburst wrapper bracelet tutorial

Step 10
starburst wrapper bracelet tutorial   starburst wrapper bracelet tutorial
And pull it through.

Step 11
starburst wrapper bracelet tutorial
Continue making links (steps 1-8) and adding them on (steps 9 & 10)…

Step 12
starburst wrapper bracelet tutorial
… until you begin to build up a chain.

Step 13
starburst wrapper bracelet tutorial
Once you have reached the desired length… this is where it gets tricky.

Step 14
starburst wrapper bracelet tutorial
Make one more link the same way as the others (steps 1-8), but then unfold the last two folds. Insert these raw edges into the same spots in the “V”.

Step 15
starburst wrapper bracelet tutorial
Pull the two ends of the bracelet close together, and hold the edges of your long “V” over both edges of the end of the other side.

Step 16
starburst wrapper bracelet tutorial
Insert the raw edges into the first wrapper. You’re doing the same thing we’ve been doing, but backwards. That’s the easiest way to think about it. It’s hard to photograph and explain, but if you’re making it look like all the other links, you’re doing it right.

Step 17
starburst wrapper bracelet tutorial
Pull ends through until you reach the original folded point, and tuck the raw edges into the previous wrapper, so it looks just like the other wrappers in the chain.
tip!   At this point, I find it helpful to use a paperclip or similar item to push the wrappers through. This is the trickiest part, and will require a bit of fiddling.

starburst bracelet!

And you’re done! Congratulations!

I’d love to see pictures or hear about your bracelet-making adventures! Leave a comment below or send me a picture of your new bracelet!

 

659 Responses

  1. Marley says:

    I don’t get step 9…

  1. May 22, 2015

    […] 16. Starburst wrapper bracelet. You know you did this back in junior high. Wear it again with this tutorial. […]

  2. May 22, 2015

    […] Starburst wrapper bracelet. You know you did this back in junior high. Wear it again with this […]

  3. June 19, 2015

    […] Now, a few of you may be thinking: That’s way too intese for me. I don’t event own a needle and thread! Fear not. You can fold and weave yourself a bracelet with nothing but two hands and a bunch of Starburst wrappers. Check out this YouTube video on how to make a Starburst bracelet. And, again, here’s the step-by-step blog version of the same process, from Fluffyland craft and sewing blog. […]

  4. October 30, 2015

    […] Use Starburst wrappers to make some pretty bracelets. Get the tutorial at Fluffyland. […]

  5. July 25, 2016

    […] 1- Starburst Wrapper Bracelet from Fluffy Land […]

  6. June 21, 2019

    […] Starburst wrapper bracelet pattern […]

  7. August 21, 2019

    […] Starburst wrapper bracelet pattern […]

  8. September 15, 2020

    […] Starburst wrapper bracelet pattern […]

  9. October 1, 2020

    […] Starburst wrapper bracelet pattern […]

Leave a Reply to Marley Cancel reply

%d bloggers like this: